In an industry where there are machines running full throttle all day, there is a crucial need for chillers. A plethora of reputed brands offers a top class of industrial chillers. These chillers come in several models and variants – water-cooled chiller, portable chiller, and the air-cooled chiller that has different applications and uses.
Industrial chiller is ideal for heat removal. It ensures to make the temperature of the place low and keep it cool for quite some time too. It is eco-friendly and this is why today, machinery is opting for such type of chillers. They help in cooling industrial area, while few others help in removing heat. They are available for use across various industries, plastic, and printing.
However, one has to remember a few points while choosing industrial chiller.
Keep the area in mind: How big is the area that one would need to cool? There are chillers that offer low temperature for the area as per the requirement.
Understanding chiller’s requirements and necessities: The water-cooled requirements would need proper water quality, and the heat recovery is not practical. The air-chilled cooler does not require good quality of water and yet; the heat recovery would need to be practical.
Paying attention to the ambient air: Since it is where the industrial chiller sends the heat air out of the room, it is necessary to keep a check. Heat loads vary with every style of chiller and hence; one must spend some time to read about it before buying.
Controller: It controls and maintains the required temperature of room or industrial area and hence; one cannot ignore its importance.
Fluid for cooling: Will it be tap water or distilled water that would be used for a chiller? Distilled water based industrial chiller might not be the preference of many. So select the chiller of tap water or distilled water-based chiller as per the choice.
Heat requirements: Know the heat load that the area would require. Calculating the heat load is easy by checking the BTU/hr. That is to say, to heat 1lb of water, 1 degree of Fahrenheit is necessary. This BTU/hr conversion is essential to understand the heat load that the chiller shall successfully use.
Compressor: The pumping device helps to pressurize the gas and make the room cool. So, lastly, check its condition and even a condenser to ensure that the industrial chiller runs on for a long time. Moreover, check that it increases the life of machinery in the industry.
Metering device: To ensure that the metering device is working smoothly, it is necessary to learn about it before shopping for the industrial chiller.